01
YKHMI Domestic JT3U single board controller supports 8-axis weighing 485 analog temperature
Specifications
1.Installation mode: DlN35 Guide Rail or Screw Fix
2.Operating temperature: 0℃~50℃
3.Storage temperature:20℃~60℃
4.Operating humidity:10%RH~90%RH(no condensation)
5.Air requirement:No corrosive, no dust
NOTE:
1: The input signal is DC24V NPN, the maximum current drive current is 10mA
2: The output mode of MR Model is the maximum driving voltage of the relay AC250V/DC30V, and the maximum driving current 3A; Peak 5A
MT model output mode is transistor, signal type DC24VNPN(low level effective), maximum drive current 500mA
3: The default analog input type is 0-10V
Can be changed to 0-20mA input can be changed to NTC thermistor input. Please refer to the instruction manual for reading method.
4: The analog output type is 0-10V and the conversion module can be changed to 0-20mA synchronous output.
Please refer to the instructions for writing method.
5:1 AB high-speed input 200KHZ(2 single-phase high-speed input 200KHZ), the specific parameters please refer to the manual.
6:MRT series default 6 or 8 high-speed output; Y0-Y5 200KHZ,Y6-Y7 100KHZ: Special registers/electrical appliances please refer to the manual.
7: The shape does not include terminals, such as calculation terminals, please add 20mm on the width.
8:CAN communication port is only used for internal networking between our PLC, please refer to the instructions for specific use.
9: Hybrid MRT series, all transistor MT, the rest of the relay MR
Description
Applications
Industrial grade, the use of stable to meet different functional scenarios
Stepper motor, encoder, servo motor, proximity switch intermediate relay, etc
